Blog

1988Currently online
108Today's Reading
35Share Today
Multilingual display

8 tips to make you successful acceptance of automatic doors

2018-05-12 22:25:00

Automatic door installation has the characteristics of "easy to use, but difficult to exquisite". If the installation is not fine because of the technology, there is no rich installation experience, it will make the automatic door frequent in the future operation of the size of the fault, and the most dangerous is the hidden trouble buried during the installation, which is usually difficult to eliminate.

Steps/methods
1

The connection of the door component must be solid and firm, with sufficient strength and stiffness to ensure that the opening and closing of the door are sensitive.

2

The installation position of the frame, door beam guide rail and lower guide rail of the automatic door must be correct, strong and reliable.

3

The installation position, connection method, opening direction, and detection range of the sensor must comply with the design requirements and corresponding industry standards.

4

Related content learned from experience

5

Automatic door induction equipment, profile door frame and accessories, glass varieties and size specifications, must meet the design requirements and the current national quality standards.

Matters needing attention
1

The appearance quality of the automatic door should meet the following requirements: Qualified: the door surface shall not have burrs, metal chips, corrosive marks and other stains, can not affect the performance of defects, local scratches, scratches should meet the provisions of the corresponding standards, the color surface of the adjacent components of the door shall not have obvious color difference, the gap between the fan and the frame is uniform. Excellent: no wave refraction on the surface, no metal chips, burrs, corrosive marks and other stains, no scratches, scratches, no damage and defects affecting performance, the surface color of the adjacent components of the door is consistent, the chamfer is smooth, and the gap between the fan and the frame is uniform.

2

The installation quality of automatic door accessories should meet the following provisions: Qualified: the installation position is correct, complete, firm, play their respective roles, with enough strength and stiffness, sensitive to open and close, no pollution. Excellent: the installation position is correct, complete, firm, correct, play their respective roles, with enough strength and stiffness, sensitive to open and close, clean, beautiful, pollution-free.

3

The quality of the automatic door coated glass glue should meet the following requirements: Qualified: the surface of the glass glue seam is smooth, there is no obvious trace at the joint, and the glue seam is pollution-free. Excellent: the surface of the glass glue seam is smooth and smooth, and there is no trace at the joint. The glue seam is clean and pollution-free.

Recommendation