Blog

1225Currently online
690Today's Reading
152Share Today
Multilingual display

Cutting and practice of bedspread

2018-04-17 03:12:24

Bed cover is one of the textiles used in the bed, used to cover the bed with dust pollution, both decorative fabric, fabric thick and durable, unique pattern, beautiful appearance. Pure cotton, chemical fiber, cotton and chemical fiber blend as raw materials, there are also cotton and chemical fiber interwoven. According to raw materials and processing methods, it can be divided into brocade bed cover, crepe bed cover, tufted bed cover and cotton-lined bed cover. The pattern design of the bedspread should be planned and grasped according to the layout tone of the entire room.

Methods/Steps
1

First, measure the size of the bed, including length, width and height.

2

This article is based on experience

3

Third, according to the size of the bed, calculate the amount of fabric ① A single bed cover can be selected with a width of more than 120 cm of fabric, about 235 cm, both ends are stitched, and the side leaves a mouth of 40 cm. The double bed needs to use two or three pieces of joint, the width to hang down 10 cm from the ground is appropriate, in the middle of the joint can be mixed color or contrast color plus a narrow strip.

4

4. Cut the fabric

5

Fifth, the cut bed cover fabric, table cloth, cotton, lining, etc., first sew up, put it on the bed after sewing, when it is suitable, if it is not suitable, fine-tune it, until it is suitable, you can sew up the thin seam carefully, after finishing, you can add some lace or flapper in the bed skirt part according to your preferences.

Recommendation