This is mainly to explain the knowledge of double-sided material. The double-sided material of 3dmax is an important topic in the performance of model special effects. Here we briefly understand how to edit and apply the double-sided material to achieve the effect we want. The main steps are as follows: 1. The double-sided material can give the front and back of the object different materials; 2. Activate the M button to mix and compound each material according to its quantity; 3. If the number is 100, the synthesis will be completed, if the number is greater than 100, the synthesis will be "overloaded"; 4. Click the Material button to the right of Back Material to enter the editing window of Back material.
Computer, 3dmax software, Resources
Double-sided materials can give different materials to the front and back of an object. Material button of the "Composite Basic Parameters" volume: Click the material button to the right of "Basic Material" to enter the basic material editing window. By default, the material is a standard material.
Activate the M button, and each material is mixed according to its number. The color and opacity are combined in the same way as without mask. Quantity: The Quantity parameter column on the right controls the quantity of the blend. For A and S synthesis, the number ranges from 0 to 200, when the number is 0, no synthesis is performed, and the following materials will not be visible.
If the number is 100, the synthesis will be completed, if the number is greater than 100, the synthesis will be "overloaded" and the transparent part of the material will become opaque until the material below is no longer visible. For M synthesis, the number ranges from 0 to 100. Material button: Click the material button on the right side of "Front material" to enter the editing window of the front material and set the material.
Click the Material button to the right of "Back Material" to enter the editing window of the back material. Other materials are synthesized in order from top to bottom by superimposing on this material. The steps are as follows: Select the file, reset the command, and reset the system. Click the teapot button to create a teapot body in the view, and uncheck the lid check box in the Parameters roll, as shown in the figure.
Do it several times