Blog

639Currently online
690Today's Reading
152Share Today
Multilingual display

How to maintain gear reducer

2018-04-14 17:36:40

How to maintain gear reducer

Methods/Steps
1

1. Check whether the oil level in the reducer meets the requirements before starting. Change the ventilation cap as prompted to make the ventilation smooth, and check whether the rotation is flexible.

2

2, the gear reducer should run empty for about half an hour before the test, and the load can be run after confirming no fault. Test should often check the operation: there should be no abnormal impact, vibration, no seepage, oil leakage. The temperature rise shall not exceed 60 ° C, and the maximum oil temperature shall not exceed 100 ° C (daily work should also be regularly checked).

3

3, if abnormal conditions are found in the work, the machine should be stopped immediately for inspection, and the fault can be identified and eliminated before continuing to work. Often check the lubrication condition, pay attention to the amount of oil, and replace the deteriorated lubricating oil in time, which has great benefits for the use of the reducer.

4

4, if the reducer in use if the installation orientation changes. The position of the oil mirror, oil plug and vent cap can be changed according to the instruction manual.

5

5, the gear reducer should be kept clean during use. Dust should not accumulate on the outer surface to prevent heat dissipation. The gear box cleaning and maintenance machine uses the original oil discharge system of the gear box and the filtered old oil to realize the cleaning of the gear box, the waste oil rapid filtration, filling of new oil and other functions, the operation process does not change the hardware facilities, do not add cleaning agents, to ensure the safe operation of the gear box, and the service life of the reducer is greater. With the home by the benefit of our maintenance

6

6, storage: in a dry and ventilated environment. When the storage period exceeds three months, it should be treated with rust prevention. If the machine is placed for about a year, check whether the oil seal is aging and whether the oil is deteriorating before use.

Recommendation