RY Air-cooled hot oil pump is a centrifugal pump that does not require cooling device to transport high temperature hot oil. RY air-cooled hot oil pump in the operation process is not easy to fail, but it is inevitable that there are accidents, Hengsheng pump industry to share the common reasons for hot oil pump stuck in operation.
RY Air-cooled hot oil pump
There is much water in the oil, and it is easy to produce steam on the pump cavity with high temperature, and the parts in the pump are damaged and stuck for a long time.
The bearing is damaged. Although the bearing is a high temperature bearing, it always belongs to the wearing parts, once the bearing is damaged, there will be noise first, if not replaced, it will soon lead to stuck.
This information is taken from experience without authorization
RY air-cooled hot oil pump and channel installation deviation is huge, pump torque increases, will lead to shaft damage stuck.
The motor broke down instantly, causing the hot oil pump to stop and get stuck.
If anomalies are found, emergency power outage and shutdown should be handled.