Trippas tuning technique

Because T3 is a 7.1 channel product, but T3 does not have decoding function, then how to connect to 7.1 channel products to feel the feeling of surround sound? Use the virtual decoding function, according to the choice of output channel, adjust the correct position of the 8 speakers, you can feel the T3 to give you the sense of surround;

If you want to connect a multi-channel speaker and really want to use stereo sound, you only need to change the channel you want to front left/right on it;

After opening the software, click on the sound field location. The lower left corner of the software has the following display;

Click position from the first one, listen to which speaker the noise is coming from, and click on any channel. (For example, if I click on the first channel, it is marked front left as shown in the figure, in fact, it is the sound made by front right with the ear)

After clicking on any channel, change (front left) to front right in the selection bar below channel one. Then the next channel, as above, click on the channel location, select the second tick, listen to which speaker the noise is coming from, and then click on either channel. (For example, I hear channel 2 actually speaking from the front right);

Select front left in the lower bar under channel 2, and so on to locate the eight speakers;

After the power is turned on, how to make the machine turn on automatically? May often encounter such a problem in the venue, after the main power supply is turned on, a series of machines such as power amplifier and karaoke machine are automatically turned on. But Trepaz's effect is quietly still turned off. Therefore, Trippas has specially made the "automatic boot" function for 3D710II, 3D710, TD710 and other models. Just press and hold the on key until it flashes to turn on the 'Auto on' function! If you need to turn off the function, press and hold the on key until the on key flashes to turn off the 'Auto on' function.