Vortex flowmeter should pay attention to the following points when installing
The vortex flow meter is a precision meter, and the meter should be installed in a dry, ventilated place with less dust
When using a vortex flowmeter to measure steam, the surface body and path must be insulated, the flange must be clamped, and there must be no air leakage, otherwise the instrument is easily damaged
It is best to install the instrument indoors, away from vibration and strong electromagnetic interference. If outdoors, the watch head can be protected
There should be at least 10-15 times the straight section before the instrument, and more than 5 times the straight section after the instrument. The installation place should be convenient for installation, wiring and debugging
It is best to have a straight section, weld the two flanges before installation, and then install the instrument, cut the equal length straight, and then install the whole table before welding. Never weld the watch on the flange